Juki LU-1508H, 1-Needle,Unison-Feed, Lockstitch
Machine with Vertical-axis Large Hook for Extra
Heavy-weight Materials, Head Only!

The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate
feed of extra heavy materials while preventing stitch gathering. With its sufficient needle bar
stroke of 38mm and long 190R needle,the machine supports the sewing of extra heavy
materials. The machine comes with an extra large steel hand-wheel with a diameter as large as

Single Needle
Unison Feed
Needle Feed And Walking Foot
2500 Stitches Per Minute
New Rectangular Feed Prevents Gathering
Handles Heavyweight Materials
Industrial Sewing Machine

New mechanism with a rectangular feeding motion promises consistent feed of materials of all
thickness without the risk of stitch gathering

Reduced lift of feed dog helps prevent the material from flopping and reduces operating noise
and vibration

Compared with elliptical feed, rectangular feed helps reduce gathered stitches

With adoption of a new rectangular feed mechanism, an alternating vertical movement
mechanism and a unison feed mechanism helps feed heavyweight materials powerfully and

Well tensed seams are consistently produced without pitch errors

With its maximum stitch length of 9 mm, the machine can be applied to a broader range of

Stitch length can be easily selected by the stitch dial

Many improved features offer enhanced operability such as an easy to Observe area around
the needle, placement of bobbin winder on the front face, and a large hand wheel

Knee-lifter mechanism built-in to bed reduces pressure required to operate the knee-lifter

Full open type top design makes it possible to fully open the top of the machine arm and
helps make adjustment easy without tilting the machine head

Alternating vertical movement mechanism prevents irregular stitches

High 16 mm presser foot lift enables easy material handling

Since machine incorporates a vertical-axis double-capacity hook, the frequency of bobbin
thread replacement is reduced, further increasing efficiency

If thread gets caught in the hook, the safety device is automatically engaged, preventing
possible hook damage

Pressing the reset button will immediately return the machine back to the normal state

Maximum stitch length: 9 mm

Needle bar stroke: 36 mm

Alternating vertical movement: 2.5 mm - 6.5 mm

Thread take-up: slide type

Hook: Vertical-axis, double-capacity hook

Needle: 135 x 17 Nm 160

Thread: #30, #5, B46, B138

* Knockdown stand, table top, 110v, DC Family servo motor additional cost !

US Warranty: 90 Days labor on defects in materials and workmanship.

Availability: Yes

Condition: Brand New in Box

Shipping: This item usually leaves warehouses 2-3 days

Returns: See Our Store Policy

Call for Price !