Custom Cut, Smooth Top Finish Vinyl, "Birch"
Plywood Premium Board & Budget Table Tops
"Made in USA"
, Can be Cut to Your Model Machine
with any Hinge Cut-Out !









Details:
These table top(s), are made out of Birch Plywood, they are Custom Cut for Industrial Lockstitch or
Walking Foot Sewing Machine(s). Each are cut 20"W x 48"L x 1-3/4"D, so they can fit for a K-Leg or
H-Leg Steel Stand. On the Bottom side of the top are:
(4), 5/16", Pressed in Anchored Steel Nuts that
are
easy  for Mounting the K-Leg, H or T-Leg Steel Stand. There are also (3), 3/8" pre-drill holes that
allows you to mount motor and (1), 1/2" pre-drill holes for the lamp and (1), 5/8" hole for Spool
Stand.

" If ", your Industrial Sewing machine Hinges are different on the backside of the Base on your
Machine, "
Measure them from the Back Right Side from the Back Base to the First hinge, then
to the second"
. Then address this to us on your email or on your order. All/Any Cushions or
Hinges are not included.
*(See the Hinges & Cushions Below)*.

The 3/4" x 13/16" Vinyl T-Molding is Factory Centered into the side of the Top to cover the raw
edge around the top. After each table top are Custom Cut, the top is finished with a Smooth Vinyl
Factory glued down and factory pressed sealed that covers the table top as shown in the photo. This
surface will allow your material to guide at ease when sewing your project and it will NOT, catch
on the surface or edges. And "if", You were to drop the table top on the edge while installations, it
will NOT crack the edges or the top/bottom surface of the custom cut table top,where others would.



"Special Ordered Custom Cut Table Top Size, Can Be Ordered" at Additional Cost. Simply Click
the Contact Policy Tab at Our Home Page and Follow the procedures and in the Comment Box tell
us with the size you prefer.
"Make Note", The Height of All/Any Custom Cut Table Top is:
1-1-3/4"D. And once you send us Your Measurements and the ordered is Purchased, Placed, there is
"No Returns, Cancellations, Refunds, Store Credits", on Custom Cut Table Top(s) !



These Table Top(s), are Made in the USA and they can be Custom Cut for Industrial Sewing
Machine(s).
 (Standard Board Size: 20"W x 48"L x 1-3/4"D), (Standard Base Bed Size Cut-Out Size):
( 7" w X 18-7/8" L)

"Email us after your purchase for easy to follow installation guide that will help you install the
table top to your K-leg, T-Leg or H-Leg Steel Stand.


*Please allow 1-2 weeks before you receive your order(s).



Add to Cart

#CN23 = Budget Blank Top >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>




Add to Cart

#CN24 = Short Premium Board >>>>>>>>>>>>>>>>>>>>>>>>>>>>







Add to Cart

#CN27= Premium Board >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>




Add to Cart

#CN27B = Budget Board >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>





Add to Cart

#CN29 Premium Board for Pfaff 145, 545, 1245/Adler 267 >>>>




Add to Cart

#CN30 = Premium Board with Round Hinges >>>>>>>>>>>>>>>>>>>









(2), Back Euro Rubber Hinge Set at Additional Cost, Colors: Black >>>>


Add to Cart




Sale Price$19.95



Pfaff 145, 545, 1245 (2), Back Rubber Cushions    >>>>>>>>>>>>>>>>>>>>>

Add to Cart




Sale Price$19.98


Pfaff 145,545,1245 (2), Metal Hinge     >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Add to Cart




Sale Price$20.98

Pfaff 145,545,1245 (2), Front Rubber Cushions  >>>>>>>>>>>>>>>>>>>>>>>>>

Add to Cart




Sale Price$18.99


Single Hole Table Hinge(2)pcs, in Set for Industrial Table Tops  
#44139 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Add to Cart




Sale Price$11.98



Metal Table Top Hinge(2)pcs, in Set #12361 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Add to Cart




Sale Price$11.98



Singer Steel Hinge(2)pcs, in Set for Models: Singer 107W, 212W
#202259 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Add to Cart




Sale Price$11.98


Off Set Metal Table Hinge(2)pcs, Set for T1019 Table Tops, for Singer
144w, 211w, 212w, Consew 225, 245, 254RB & Juki Models
#osh1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Add to Cart




Sale Price$19.99
C1C1S1V1B1B2T1
E1H2C2C1S2V1B1B2T1
Hi,Wanted to pass along a big thank you to everyone involved with the custom cut top and leg set I recently ordered.
The cut is perfect for this machine. It all went together very quickly and in no time we were fully operational.
I've attached  pictures so you can see how nice it came out. Thanks so much for a quality product.

Regards,
David J Perillo, Chief bottle washer,
Mini Hobo Bags
  
R2000U1C2C1S2V1B1B1T1
R1C1C1S1V1B1B1T1A11
P2C2C1S2V1B1B2T1C
P2C1S2V1B1B2T1C
P2C1S2V1B1B2T1E
D1R1D1I1C1C1H1T1T1D11S1B1L2
C1I1B1B1B1T1C1N23K
I1S1P1B1C1N24Q
I1P1B1C2N27W
I1S1B1B1C1N27B1Y
I1S1P1B1A1P2C2N29T
I1S1P2B1R2H2C2N30T
S1H1T1H44139K1
I1T1T1M1H12361K1
S107212W1M1H202259K1
I1O1S1H1O1S1H1K1